Free shipping over $500 in Canada – excludes Online Only items
Victory VAP SS .166 Fletched Hunting Arrows combine Victory's micro-diameter VAP platform with advanced hybrid carbon and stainless-steel technology for serious bowhunting performance. Built around a .166" micro-diameter design, the VAP SS is engineered for penetration, durability, speed and reduced wind deflection while giving hunters a premium factory-fletched arrow ready for final setup.
The VAP SS combines 3K MaxxKe carbon weave technology with digital spine alignment, precision weight matching and Victory's ICE nano-ceramic coating. Choose Elite / V1 ±.001", Gamer / V3 ±.003" or Sport / V6 ±.006" and select the appropriate spine from 200 through 400. Each 6-pack is hand fletched and includes 50-grain SHOK TL aluminum inserts and 8-grain IP .166 nocks.
Please Note: These are fletched finished hunting arrows, not bare shafts. Broadheads and field points are not included. Fletching colours may vary depending on factory production.
Victory VAP SS arrows are available in three precision grades. Select your preferred straightness grade and then choose the appropriate spine for your bow and finished hunting-arrow configuration.
| Victory Grade | Straightness |
|---|---|
| Elite / V1 | ±.001" |
| Gamer / V3 | ±.003" |
| Sport / V6 | ±.006" |
| Spine | GPI | Full Shaft Length | Shaft ID |
|---|---|---|---|
| 200 | 12.5 | 31" | .166" |
| 250 | 11.0 | 31" | .166" |
| 300 | 9.9 | 31" | .166" |
| 350 | 8.8 | 31" | .166" |
| 400 | 8.6 | 31" | .166" |
Proper arrow spine depends on the complete bow setup, including draw weight, draw length, bow speed, finished arrow length, broadhead or point weight and component weight.
Elite / V1 provides the tightest straightness tolerance in the VAP SS lineup at ±.001". It is designed for bowhunters looking for the highest available straightness specification within the VAP SS family.
V1 combines this precision tolerance with the same VAP SS micro-diameter platform, MaxxKe technology, digital spine alignment, matched-weight specification, ICE coating and hand-fletched configuration.
Gamer / V3 provides a ±.003" straightness tolerance while retaining the core construction and performance technologies of the VAP SS platform.
It provides an excellent balance between precision and value for serious bowhunters looking for a premium micro-diameter hunting arrow.
Sport / V6 provides a ±.006" straightness tolerance while retaining the fundamental VAP SS design and technologies.
V6 provides an accessible entry into the VAP SS platform while maintaining MaxxKe technology, digital spine alignment, ICE coating and hand fletching.
Victory developed the VAP SS as an advanced hybrid carbon and stainless-steel hunting-arrow platform, building on the company's experience with micro-diameter mandrel-wrapped carbon shafts.
The goal is a premium hunting arrow combining the speed and aerodynamic advantages of a micro-diameter carbon shaft with the performance characteristics engineered into the VAP SS hybrid construction.
This hybrid design is what separates the VAP SS from Victory's standard VAP hunting-arrow platform.
The VAP SS incorporates Victory's advanced 3K MaxxKe carbon weave technology.
MaxxKe technology is engineered to reduce unwanted torque and torsional movement as the arrow leaves the bow. Reducing this movement allows the shaft to recover more quickly after launch while promoting uniform spine consistency.
The result is a hunting-arrow platform designed around fast recovery, consistent flight and efficient downrange performance.
The VAP SS uses Victory's proven .166" micro-diameter platform. Its narrow profile presents less surface area to crosswinds than a larger-diameter arrow, helping reduce wind deflection as shooting distance increases.
The micro-diameter shaft also creates a streamlined profile behind the broadhead, supporting penetration-focused hunting setups.
This combination makes the VAP SS especially well suited to demanding bowhunting situations where wind, distance and penetration can all influence arrow performance.
The VAP SS combines high-modulus carbon construction with a narrow .166" profile to create a hunting-arrow platform designed for both speed and penetration.
Its smaller diameter reduces the amount of shaft material following behind the broadhead, while the SHOK TL front-end component system creates a durable connection between the micro-diameter arrow and broadhead.
The VAP SS provides excellent flexibility for bowhunters building a high front-of-centre, or FOC, hunting-arrow setup.
The included 50-grain SHOK TL aluminum insert adds meaningful front-end mass. Optional 75-grain and 95-grain SHOK TL components allow additional weight to be concentrated toward the front of the arrow.
This gives hunters additional flexibility when balancing total arrow weight, FOC, trajectory, broadhead choice and penetration characteristics.
Each VAP SS arrow includes a 50-grain SHOK TL aluminum insert manufactured from 7075 aluminum alloy.
The SHOK Taper Lock system incorporates an impact-protection sleeve around the front of the shaft, helping strengthen the arrow tip and increase impact resilience and durability.
Taper-lock machining is designed to improve strength and concentricity while creating a secure interface between the micro-diameter arrow and broadhead.
The SHOK TL adaptor accepts standard 5/16" broadheads with an 8-32 thread, allowing the VAP SS to work with a broad selection of conventional hunting broadheads.
The included 50-grain aluminum component provides a versatile starting point, while optional heavier SHOK TL components provide additional front-end weight for hunters building higher-FOC configurations.
These optional heavier components allow hunters to increase front-end mass and further customize finished arrow weight and FOC.
Optional components are sold separately and are not included with this 6-pack.
Each VAP SS arrow includes an 8-grain IP .166 nock designed for Victory's micro-diameter arrow platform.
The lightweight nock complements the .166" shaft and provides a consistent rear component for the finished hunting arrow.
Every VAP SS arrow in this 6-pack is hand fletched for optimum vane adhesion and alignment.
These are finished fletched hunting arrows rather than bare shafts, eliminating the need to purchase and install vanes separately.
Fletching colours may vary depending on factory production.
Every VAP SS arrow is digitally spine aligned to promote increased accuracy and shot-to-shot consistency.
Consistent spine orientation helps minimize arrow-to-arrow variation and provides a uniform foundation when tuning and broadhead testing a matched set of hunting arrows.
Victory weight matches each dozen VAP SS arrows to approximately ±0.5 grains.
Closely matched arrow weights help minimize unnecessary variation and support consistent trajectory and tighter grouping.
The VAP SS features Victory's ICE nano-ceramic coating, creating a slick exterior surface on the arrow.
The coating is designed to improve penetration while also helping arrows pull more easily from targets during practice, sight-in and tuning sessions.
The Victory VAP SS is designed for bowhunters looking for a premium factory-fletched .166" micro-diameter hunting arrow with Victory's advanced hybrid technology.
The narrow shaft profile helps reduce wind exposure while providing a streamlined path behind the broadhead. Victory's 3K MaxxKe technology is engineered to reduce unwanted torque, promote faster arrow recovery and provide uniform spine consistency.
Choose Elite / V1 ±.001" for the tightest straightness tolerance, Gamer / V3 ±.003" for an excellent balance of precision and value, or Sport / V6 ±.006" for an accessible entry into the VAP SS platform.
The included 50-grain SHOK TL aluminum inserts provide a durable front-end component system with excellent FOC potential, while the included 8-grain IP .166 nocks complete the rear of the arrow.
With hand-installed fletching already in place, the VAP SS 6-pack provides a professionally prepared hunting-arrow platform ready to be matched with the appropriate point or broadhead for your bow setup.
Yes. This product contains 6 hand-fletched Victory VAP SS hunting arrows. These are not bare shafts.
Each package contains 6 Victory VAP SS .166 fletched hunting arrows.
Choose from Elite / V1 ±.001", Gamer / V3 ±.003" and Sport / V6 ±.006".
The primary difference is straightness tolerance. Elite / V1 is ±.001", Gamer / V3 is ±.003" and Sport / V6 is ±.006".
The VAP SS is available in 200, 250, 300, 350 and 400 spine. Available grade and spine combinations may vary by inventory.
The shaft weights are 200 – 12.5 GPI, 250 – 11.0 GPI, 300 – 9.9 GPI, 350 – 8.8 GPI and 400 – 8.6 GPI.
The VAP SS uses Victory's .166" inside-diameter micro-diameter platform.
The VAP SS uses a 31-inch full shaft length before any custom cutting.
Victory's MaxxKe technology uses an advanced 3K carbon weave designed to reduce torque, promote faster recovery of arrow flight and provide uniform spine consistency.
Yes. Every VAP SS arrow is digitally spine aligned to promote increased accuracy and shot-to-shot consistency.
Yes. Victory weight matches each dozen to approximately ±0.5 grains.
Victory's ICE nano-ceramic coating creates a slick arrow surface designed to improve penetration and make arrows easier to remove from targets.
Each arrow includes a 50-grain SHOK TL aluminum insert and an 8-grain IP .166 nock. The arrows are also supplied fletched.
No. Broadheads and field points are sold separately.
Yes. The SHOK TL adaptor accepts standard 5/16" broadheads with an 8-32 thread.
Yes. Optional 75-grain and 95-grain SHOK TL components provide additional front-end mass for hunters building higher-FOC arrow configurations.
The narrow profile presents less surface area to crosswinds and creates a streamlined shaft behind the broadhead, making the VAP SS well suited to penetration-focused and longer-range hunting setups.
The VAP SS 6-pack contains fletched hunting arrows, while the VAP SS 12-pack contains unfletched arrow shafts intended for custom arrow building.
Victory VAP SS .166 Fletched Hunting Arrows combine advanced hybrid technology, 3K MaxxKe carbon construction, micro-diameter performance, digital spine alignment, precise weight matching, ICE coating and hand fletching. Choose Elite / V1, Gamer / V3 or Sport / V6 and match the proper spine to your bow for a premium hunting-arrow platform built around penetration, consistency and performance.
Gamer / 200
Leapfrog Outdoor Sports And Apparel
Pickup available,usually ready in 24 hours
316 13 Street North
Lethbridge AB T1H 2R8
Canada
| Price |
|---|
| SKU |
| Rating |
| Discount |
| Vendor |
| Tags |
| Weight |
| Stock |
| Short Description |
Ships quickly across Canada and the US